How To Skin Logs



I tried skinning a log that fell down from the weather a few weeks ago, but the log was so dry. If you skin them as soon as you cut them they will be WET then, it will be easier to peel the bark off of it using the draw blade I have mentioned. Skinning the log works great with a draw blade that has two handles for easy skinning. You just take the blade as it has one handle on each side of the blade and you work it from top to bottom at a angle so thebark comes off easier and less elbow muscle. It was my first time, and it was a cinch so im happy to say that I will be doing this more often. Watch the video, and you will understand that to skin bark off a log as you will have to have the blade angled to get better results. As this was my first time, I did not know what to expect but, I can tell you this, it wasn't what I expected. You can make log furniture once the logs are skinned and dried and after you stain paint it, it will look nice as a piece of furniture that...

[ Continued ]

I was sharpening a draw blade for skinning logs and the wife was talking to me so i looked away and sliced my finger open, here is the video of her stitching it up for me. We get our sutures off ebay !




Link To Video: http://www.youtube.com/watch?v=Ms6pXNUHfX4

Update: blog/Johnny/been_a_while_so_here_is_an_update_b-45.html

So i have a LEHR 25 CC 4-Stroke Curved-Shaft Propane Powered Eco Trimmer, and the stupid thing was leaking propane. So i am going to show you how to reset the diaphragm.


What happened was i was out of town at work ( yea unusual for anyone who knows me LOL, Im always out of town)
And Angelz is my GF and she is pretty independent (even if she is a blond) so she was reading that you have to change the oil every 10 hours of run time.
She changed the oil and when she filled it back up CORRECTLY to the fill line, the manufacturer FAILED to mention the DIP stick is wrong, so you have to fill JUST below FILL line or, the back pressure causes the DIAPHRAGM of the carburetor to pop out of the float hole, thus causing the float to stick open causing PROPANE LEAKAGE.

I have posted some pictures to show you the process in RESETTING the DIAPHRAGM.




[ Continued ]

I found this site, and it might be useful to those having problems.

http://hubpages.com/hub/Weed-whacker-wo ... -quick-fix

Found this link on accident, thought id share it with you guys. Its about the 2012 pole shift they are predicting.


Link To Video: http://www.youtube.com/watch?v=1aPNcUJuiLY
Check it out